產品說明

Zytel® RS 3261THSL BK041A is a renewably sourced polyamide 610 resin containing a minimum of 47% renewably sourced ingredient by weight. It is a black, unreinforced, toughened and heat stabilised resin for injection molding applications.

總體

      材料狀態      •Preliminary Data 1                         

      資料2   •Technical Datasheet

      搜索UL黃卡     •DuPont Performance Polymers

              • Zytel® RS

             •北美洲      •南美洲      •中美洲             

      供貨地區      •非洲和中東      •歐洲                 

             •拉丁美洲   •亞太地區                 

      性能特點      •可更新資源                           

       RoHS合規性      •聯系制造商                           

      外觀      •黑色                        

      形式      •顆粒料                           

      加工方法      •注射成型                        

      部件標識代碼(ISO 11469) •>PA610-I<                      

      樹脂ID (ISO 1043)     •PA610-I                          

      物理性能      干燥      調節后的      單位制   測試方法      

      密度       1.03 --     g/cm3     ISO 1183

      收縮率                         ISO 294-4     

      橫向流量: 2.00 mm     1.2   --     %          

      流量: 2.00 mm     1.5   --     %          

      機械性能      干燥      調節后的      單位制   測試方法      

      拉伸模量(23°C) 1500       800  MPa ISO 527-2     

      拉伸應力(屈服, 23°C)      40.0 32.0 MPa ISO 527-2     

      拉伸應變                                  

      屈服, 23°C   5.0   30    %    ISO 527-2     

      斷裂, 23°C   35    250  %    ISO 527-2/50 

      斷張率(23°C)    65    200  %    ISO 527-2     

      沖擊性能      干燥      調節后的      單位制   測試方法      

      簡支梁缺口沖擊強度(23°C,局部斷裂) 70    95    kJ/m2     ISO 179/1eA 

      簡支梁缺口沖擊強度(23°C)   無斷裂   無斷裂           ISO 179/1eU 

      懸壁梁缺口沖擊強度(23°C,局部斷裂) 65    80    kJ/m2     ISO 180/1A   

      熱性能   干燥      調節后的      單位制   測試方法      

      熱變形溫度                               

       0.45 MPa,未退火110  --    °C ISO 75-2/B    

       1.8 MPa,未退火   50.0 --    °C ISO 75-2/A   

      熔融溫度4    223  --    °C ISO 11357-3  

      注射             干燥單位制        

      干燥溫度              80.0°C               

      干燥時間-熱風干燥機             4.0到6.0hr               

      建議的最大水分含量           < 0.10%               

      加工（熔體）溫度              250到270°C                  

       Melt Temperature, Optimum - Injection Molding 260°C                  

      模具溫度              40.0到80.0°C                

       Mold Temperature, Optimum - Injection Molding       70°C